Incineration- Energy, Ceramic, Steel and foundries, Cement, Glass, Decorative
We carry on our refractory research, 60 years providing our customers Refractory Solutions for any type of installations.
Our laboratory’s people together with our research and development Department (R&D) is continuously performing several tests in our facilities not only to control the consolidated products but also the ones that are still under study to be developed.
Among others, the following tests are performed:
- MECHANICAL RESISTANCE.
- RESISTANCE TO THERMAL SHOCK.
- ABRASION RESISTANCE
- OXIDATION OF THE MATERIAL.
- REVERSIBLE LINEAR VARIATION
- PERMANENT LINEAR VARIATION
- IMPACT RESISTANCE
- YOUNG’s MODULUS
- FLUENCE. (∆ dimension at constant temperature)
- CREEP (∆ dimensión at increased temperature)
- VICAT TEST
- GRANULOMETRY TEST
- MIXING EQUIPMENT
- WORKABILITY TEST
Test of THERMAL SHOCK.
UNE EN 993-11 Norm
Measurement of the YOUNG’s MODULUS
UNE EN 993-6 Norm
IMPACT RESISTANCE Test
MECHANICAL RESISTANCE Test – Compression
Norma UNE EN 993-5
Test de OXIDACIÓN
Oxidation measuring machine.
Determination of RESISTANCE TO ABRASION.
UNE EN ISO 10545-6:1998 Norm.
REVERSIBLE Linear Variation / PERMANENT Linear Variation (1650ºC).
EN 993-10 and EN 1094-6 Norms.
Needle to determine:
UNE EN 196-1 and UNE EN 196-3 Norms.
SUPERVISION OF THE LINING ASSEMBLY AND TECHNICAL ASSISTANCE.
TEIDE REFRACTORY SOLUTIONS, S.L., offers its customers a complete service after the sale, supervising the Assembly of refractory lining in its facilities…
This supervision is carried out by experienced technicians who not only contribute to proper Assembly of the cladding in situ, if not bringing technical solutions suitable for each type of installation or our customers industry: steel, cast iron, ceramic….
CONTACT US AND WE WILL ATTEND YOU WITHOUT COMMITMENT.