Incineration- Energy

TEIDE REFRACTORY SOLUTIONS, S.L. SPECIALIZED IN THERMO-DESTRUCTORS OF VAPORS AND OXIDATION OF WASTE WATER AT HIGH TEMPERATURES FOR PROCESSING INDUSTRIES OF FATS AND ANIMAL SUB-PRODUCTS.

With over more than 20 years of experience in this sector, after having developed and participated in engineering procedure, supply and assembling refractory linings in more than 10 Nationals plants,, TEIDE REFRACTORY SOLUTIONS, S.L., is specialized in installations for Processing Industries of fats and Animal sub-products.

Our R+D Department, together with the collaboration of our customers, not only has developed a catalogue with a range of special products but also maintains a continuous development process to be able to solve different problems, difficulties or needs that our customers may have in order to contribute in reducing costs and improving its productivity, obtaining optimal results for each specific case.

The common qualities used in the parts exposed directly to the fire are the following ones:

Shaped Dense Material:

  • 4-DD-R
  • 4-DD-S
  • MULL-60-R
  • MULL-65
  • MULL-65-B

Unshaped Dense Material:

  • PYROFORM TIX-40/FP2
  • PYROFORM TIX-40-E
  • PYROSOHOT MCC-60
  • PYROFORM SGC-60/G

Shaped Insulating Material:

  • T-26
  • T-28

Unshaped Insulating Material:

  • ISOFORM 21/8
  • ISOFORM 23/12

Protective Paint:

  • KERAPLAS

  • Some assembling images:

Lining of the combustion zone by placing ceramic paper (3rd part), insulation edge brick (2nd part) and dense edge brick (1st part – face directly exposed to fire).

The left image (below these lines), shows the placement of the insitu manufactured form for proper placement of the edge bricks.

On the right image, (below these lines), it is shown in detail the assembling of the access door.

In the image on the left (below these lines) you can see the burner and finished combustion zone. On the right, the image shows the protection against gases and chemical attacks through the application of our KERAPLAS paint.

The lining of a thermo- digester with insulating materials may be seen in this image:

  • Combustion zone and the way to post combustor with insulating bricks.
  • Post combustor lined with ceramic modules.

  • Detailed of the plans of assembling, placement of anchors, etc.

Inicio > Blog